Specialist Service

Signage & Compliance

Statutory, directional and custom signage manufactured to council and AS standards.

AS/NZS Compliant

Fully Insured

After-hours Available

What's included

The scope, in detail.

Wrong sign, wrong fine. We manufacture and install signage to AS 1742, AS 2890.5 and council DA requirements — including disabled parking, EV bays, loading zones and statutory regulatory signs. Aluminium composite or Class 1/2 reflective, custom branded if needed.

Statutory regulatory signage

Disabled parking (AS 2890.6)

EV charging bay signage

Parent / pram parking

Loading zone & no-stopping

Height & speed clearance signs

Directional & wayfinding

Custom branded signs

Send us the site →

Standards we work to

Built to Australian Standards.

Every signage & compliance install we deliver references these standards. We hand them over in writing at sign-off.

AS 1742

Manual of Uniform Traffic Control Devices

Australian standard covering all regulatory, warning and guide signs — colour, shape, size, retroreflectivity, mounting height.

AS 2890.6

Off-Street Parking — Disabled

Specifies the International Symbol of Access (ISA) signage for accessible parking bays — minimum 300×450mm at bay-head, plus ground stencil.

AS 1906.1

Retroreflective Materials

Class 1 (high-intensity), Class 2 (engineering grade) and Class 1W reflective sheeting for regulatory and warning signs.

AS/NZS 1906.4

Long-Service Sign Materials

Specifies the substrate and ink longevity (typically 10-year UV warranty) for permanent statutory signs.

Common questions

Signage & Compliance, answered.

What's the difference between Class 1 and Class 2 reflective signs?

Class 1 (high-intensity) is brighter, used for regulatory signs viewed by moving vehicles. Class 2 (engineering grade) is standard for car park informational signs. Class 1 costs more but lasts equally long.

Do I need council approval for car park signage?

For most internal private car park signs, no. For any sign visible from a public road, or for changes to existing approved signage, yes — your council DA may require approval. We can advise.

Can you produce signs to my brand colours?

Yes. Custom branded signs use the same compliant substrate and reflective base, with your colours, fonts and logo overlaid. Brand-matched ISA accessible signs are popular with strata clients.

What materials do you use for outdoor signs?

3mm aluminium composite panel (ACM) for substrate, Class 1 or Class 2 reflective vinyl, UV-stable digital print top layer. 10-year UV warranty on materials.

How are signs mounted?

For ground-mounted: 50×50mm galvanised steel post, concrete-set 600mm deep. For wall-mounted: stainless steel fixings sealed with marine sealant. For ceiling/structural: powder-coated mounting brackets.

Do you take down old signs?

Yes, and we remove the existing posts and patch the slab as part of the install — for a clean handover.

Related services